Siemens generator(400V,50Hz)

INTRODUCTION

　　1FC6　brushless 3 phase synchronous generators is renewal product instead of 1FC5 series generators in 1980's.We introduced the advanced patent techniques of this generators from siemens in 1989.Our company have obained quality system certificate by siemens and technological certificats and by the ministry of machinery industry and the classification Societies of china in 1990.In recent years measurement ability of the series generators are raised through technological Introdction and tfansformations.

　　The series generators can be used as spare power or mobile power supply applied to railway post,mile and charter,which have gone into international market.

　　THE　DESCRIPTION　OF　TYPE（EXAMPLE）

 

TECNNECAL　DATA：

1.The rated power is the rated output of generator which under the conditions.

a.Continuous running duty (sl)

b.The altitude is not over 1000 meters.

c.Ambient temperature:Land-Based alternators not exceeding 40℃；Marine alternators not exceeding 45℃。

d.Power factors:0.8

The rated power can be amended according to standard.

2.Rated voltage;50Hz,400V,60Hz,450V.

We can also meet your special requirements.

PERFORMANCE

1.Voltage regulation factor and voltage recover time.

When the speed of the engine should rise by not more than about 5% at power factor are 0.8,the voltage regulation factor of alternators can be allowed in ±1.5%　from　no load to rated load. When application of load.the transient voltage of alternator should reduced to 85%　of rated value.The voltage should rise 120% of rated value and the voltage recovers its rated value after approx.0.5s.

2.Volt ware form distortion

The sine distortion of voltage by no-load approx 2%.

3.Radio interference suppression

The alternators are supplied with interference suppression A to GB 7060.

4.asymmetric operation　

The alternator should not be operated to exceed rated current and the difference in each phase current value to exceed 15% of rated value and the difference in each phase voltage to exceed 5% of average value of three phase.

5.overload

The alternators can have an overload of 10% for lh or can be operated at 150% rated load for 2 min,at power factor are 0.5.

6.over-speed

The rotating speed of alternator should rise about 120% in load,the rated rotating speed can be operated for 2 mins.

7.Sudden short-circuit and short-cir cuit rating.

Three phase happens short-circuit when the alternator operated in no load at rated frequency and rated voltage.

The peak value of the short-circuit current should not　be allowed to exceed 15 times of the value of rated current.The short-circuit are 3 times of rated value which can be susaind by at least 2s.after short-circuit rating.

8.Parallel operation

The same size or the different size of this series alternator all can operated in parallel and the reactive power sharing conform to the standards of technical condition of our products.

CONSTRUCTION

The alternator comprises the main machine(revolving-field machine with cylindrical rotor and damper widing).exciter(revolving armature machine)and excitation equipment.The excitation power is supplied to the rotor the main machine via rotating rectifiers.The insulation class F.The degree of proteetion IP23,IP44 or IP54,it fan cooler when it is IP23,it built on air/water cooler when it is IP44 or IP54.

The generator is usually double pivot point,but also can be made into single pivot point to meet customer's reguest.The generators have lots of mounting model and dimensions which meets the customer's reguire-ments.

EXCITATION SYSTEM

The alternators are load-dependent excitation,compounding with thyristor voltage regulator.This method results in excellent dynamic respomse.

STANDARDS AND CODES OF PRACTICE

The alternators conform to applicable IEC reguinments ,DIN standards and VDE codes and GB board standand,specification for rotating electrical machines and classification societies rules ,your special requriements are welcome. 《Technical conditions for lfc6 series brushless three-phase syncchronous generatorsa》Q/LD101-1997 in compliance with the above standard and code to be made which is based on manufacture and test of series generaton.

NOTES OF ORDFRING

This catalogue only is a reference infor-mation for user.The concrete data may be changed.

Please contact us before ordering.

 

TECHNIAL　SPECIFICATIONS

4 poles(1500rpm)
Capacity	Type	Net	Moment	Power	Current	Rev./min	Performance data					Technical data for short-circuit calculation
		weight	of inertir	input			1/2    3/4     4/4     5/4    4/4					Xd	Xq	Xd	Xd"	Xq"	X2	r1	Ta	Td'	Td"
kVA		kg	kgm2	kW	A		%	%	%	%	%	%	%	%	%	%	%	%	s	s	s
26	1FC6 184-4	255	0.26	24	27.5	1500	89.2	88.8	87.6	86.2	90.2	260	210	11.6	7.8	9.4	8.6	5.1	0.011	0.022	0.001
30	185-4	280	0.31	27	43	1500	90.2	90.3	89.6	88.6	92.3	210	150	8.6	5.8	7	6.4	3.6	0.012	0.023	0.001
35	186-4	285	0.32	32	51	1500	89.9	89.4	88.2	86.7	91.3	250	180	10	6.8	8.2	7.5	4.2	0.012	0.023	0.001
45	1FC6 223-4	380	0.63	40	65	1500	89.7	90.6	90.5	90	92.8	220	160	9.9	6.2	7.4	6.8	2.6	0.011	0.039	0.001
56	224-4	390	0.66	50	81	1500	89.7	89.9	90	89.1	92.4	280	200	12.3	7.6	9.1	8.4	3.2	0.011	0.038	0.001
69	225-4	490	0.9	61	100	1500	91.2	92	91.9	91.4	93.7	230	170	8.7	5.4	6.5	5.9	2.2	0.011	0.035	0.001
80	226-4	500	0.93	71	116	1500	91.4	91.4	90.6	89.6	92.8	280	210	10.6	6.7	8	7.4	2.7	0.011	0.034	0.001
120	1FC6 283-4	690	1.94	104	173	1500	91.3	92.3	92.4	92	94.2	240	180	10.6	6.5	7.8	7.2	1.7	0.016	0.054	0.001
145	284-4	705	2.02	126	210	1500	92.2	92.5	92.1	91.4	94	310	230	14.2	8.6	10.3	9.5	2.2	0.015	0.053	0.001
175	285-4	910	2.88	150	255	1500	92.1	93	93	92.7	94.5	270	200	9.7	6	7.2	6.6	1.6	0.021	0.056	0.001
210	286-4	925	2.96	180	305	1500	92.8	92.9	92.4	91.6	94.1	310	230	11.6	7.1	8.5	7.9	1.9	0.02	0.055	0.001
250	1FC6 351-4	1200	4.2	210	345	1500	92.3	92.3	92	90.7	93.9	560	420	28	15.3	16.7	16	2.6	0.016	0.039	0.003
280	352-4	1250	4.4	250	405	1500	92	91.6	91	89.3	93.1	430	320	23	13.7	18	15.9	2.2	0.018	0.044	0.003
325	353-4	1270	4.8	280	470	1500	92	93	92.5	91.8	94.6	320	240	18	10.6	14.2	12.4	1.6	0.018	0.042	0.004
340	354-4	1300	5	305	505	1500	92.7	92.5	92	90.8	94	360	270	20.3	12	16	14	1.8	0.02	0.046	0.004
385	355-4	1470	5.8	330	555	1500	93.4	93.6	93.2	92.6	95.1	290	230	14.3	8.5	11.4	9.9	1.5	0.017	0.041	0.003
420	356-4	1500	6.1	360	610	1500	93.3	93.2	93	91.7	94.6	320	250	15.8	9.4	12.6	11	1.7	0.019	0.045	0.003
450	1FC6 403-4	1710	9	390	650	1500	93.4	93.4	93.1	92	94.7	370	280	20.7	12.7	17.2	14.9	1.9	0.019	0.05	0.003
510	404-4	1750	9.4	445	740	1500	93.2	92.8	92.2	90.9	94	420	320	23.5	14.4	19.2	16.9	2.2	0.021	0.055	0.003
560	405-4	1860	10.7	480	810	1500	93.9	94	93.6	92.9	95.3	320	240	17.3	10.6	14.6	12.6	1.5	0.02	0.049	0.004
600	406-4	1900	11.1	515	870	1500	93.7	93.6	93	92	94.8	340	260	18.5	11.4	15.6	13.5	1.6	0.022	0.053	0.004
690	1FC6 453-4	2660	15.6	590	1000	1500	94.4	94.5	94.1	93.6	95.6	450	340	21.3	12.6	15.5	14	1.8	0.022	0.059	0.003
800	454-4	2700	16.1	685	1150	1500	94.3	94.1	93.5	92.7	95.1	520	400	24.7	14.6	18	16.3	2.1	0.024	0.065	0.003
875	455-4	2810	17.7	740	1260	1500	94.8	94.7	94.3	93.5	95.7	410	310	17.9	10	12.6	11.3	1.6	0.021	0.055	0.003
950	456-4	2850	18.2	810	1370	1500	94.6	94.3	93.6	92.7	95.2	450	340	19.5	11	13.8	12.4	1.8	0.023	0.06	0.003
1070	1FC6 502-4	3250	32	915	1540	1500	93.9	93.8	93.6	92.5	94.9	390	300	20.8	11.7	14.8	13.3	1.8	0.023	0.075	0.003
1310	504-4	3350	34.6	1110	1890	1500	94.4	94.2	94	92.9	95.2	440	330	19.1	11	14.3	12.7	2.1	0.02	0.076	0.003
1420	506-4	3500	37.1	1200	2050	1500	94.6	94.5	94.2	93.1	95.3	460	350	20	11.1	14.2	12.7	1.8	0.022	0.074	0.003
1730	1FC6 562-4	4150	47.5	1470	2500	1500	94.2	94.4	94.3	93.4	95.4	460	350	24	13.4	17.1	15.3	1.9	0.026	0.094	0.005
1850	564-4	4540	50.3	1570	2670	1500	94.2	94.4	94.3	93.3	95.4	420	320	22.6	13	16.4	14.7	1.7	0.027	0.09	0.005
2000	566-4	5000	56.3	1690	2890	1500	94.8	94.9	94.8	93.9	95.8	470	350	20.5	11.6	14.7	13.2	1.3	0.031	0.087	0.004
2200	1FC6 632-4	6600	91	1850	3180	1500	93.9	94.8	94.9	94.5	96.1	250	230	25.5	18.5	19.2	18.9	1.2	0.056	0.211	0.013
2300	634-4	7100	99	2180	3320	1500	94.4	95.1	95.2	94.8	96.4	250	230	24	17.5	18.1	17.8	1.2	0.053	0.209	0.013
2500	636-4	7700	106	2430	3600	1500	94.7	95.4	95.4	95.1	96.5	250	220	22	16	16.8	16.5	1.2	0.051	0.207	0.013
6 poles(1000rpm)
Capacity	Type	Net	Moment	Power	Current	Rev./min	Performance data					Technical data for short-circuit calculation
		weight	of inertir	input			1/2    3/4     4/4     5/4    4/4					Xd	Xq	Xd	Xd"	Xq"	X2	r1	Ta	Td'	Td"
240	1FC6 354-6	1360	7.5	210	345	1000	92.8	92.2	91.2	89.9	93.6	290	220	18.8	10.3	12.4	11.4	2.4	0.015	0.043	0.002
310	356-6	1560	8	270	445	1000	93.1	93.1	92.4	91.6	94.8	200	150	13.4	7.2	8.8	8	1.9	0.013	0.041	0.002
375	1FC6 404-6	1750	11.2	325	540	1000	93.1	92.7	92.1	90.7	94	300	230	17.8	9.7	11.9	10.8	2.4	0.014	0.044	0.002
475	406-6	1950	13.3	410	690	1000	93.7	93.4	92.8	91.6	94.6	300	220	16.3	8.9	11	9.9	2	0.015	0.044	0.002
590	1FC6 454-6	2700	19	510	850	1000	93.6	93.5	93	91.9	94.7	340	260	19	11	13.6	12.3	1.9	0.02	0.054	0.002
625	455-6	2750	20	540	900	1000	93.8	94	93.4	92.4	95	340	260	18.7	10.8	13.1	12.1	1.9	0.02	0.054	0.002
710	456-6	2850	22.2	610	1020	1000	94.8	94.5	93.7	92.9	95.4	350	270	18	10.4	12.9	11.6	2	0.019	0.053	0.002
1000	1FC6 502-6	3250	31.6	860	1440	1000	94.3	93.9	93.4	92.1	94.9	360	270	20.2	10.7	13.3	12	2.5	0.015	0.056	0.003
1150	504-6	3500	336	980	1660	1000	94.5	94.3	94	92.8	95.3	330	250	19	10	12.5	11.2	1.9	0.019	0.055	0.003
1250	506-6	3800	42.1	1060	1800	1000	94.5	94.4	94.1	93	95.4	290	220	14.9	7.8	9.6	8.7	1.8	0.015	0.055	0.003
1310	1FC6 562-6	4400	53.1	1110	1890	1000	94.8	94.5	94.1	93	95.5	320	240	19.8	10.6	13	11.8	1.8	0.021	0.071	0.004
1500	564-6	4850	60.8	1270	2170	1000	94.9	94.6	94.3	93.1	95.5	370	280	19.6	10.3	12.6	11.9	1.7	0.021	0.07	0.004
1600	566-6	5150	66.9	1350	2310	1000	95.3	94.9	94.6	93.5	95.8	350	260	19.4	10.5	12.7	11.6	1.6	0.024	0.07	0.004
1750	1FC6 630-6	6500	123	1480	2530	1000	94.3	94.8	94.7	94.2	95.9	230	210	24.5	18	18.8	18.4	1.5	0.045	0.177	0.011
1920	632-6	6800	133	1620	2770	1000	94.3	94.8	94.7	94.1	95.9	240	220	25	19.5	20.1	19.7	1.5	0.047	0.186	0.011
2150	634-6	7100	142	1810	3110	1000	94.8	95.2	95.1	94.5	96.3	250	220	23	17.5	18.2	17.7	1.5	0.043	0.177	0.011
2400	636-6	7500	152	2010	3470	1000	95.1	95.6	95.5	95.1	96.6	240	220	20.5	15.5	16.3	15.8	1.3	0.045	0.174	0.011
8 poles(750rpm)
Capacity	Type	Net	Moment	Power	Current	Rev./min	Performance data					Technical data for short-circuit calculation
		weight	of inertir	input			1/2    3/4     4/4     5/4    4/4					Xd	Xq	Xd	Xd"	Xq"	X2	r1	Ta	Td'	Td"
kVA		kg	kgm2	kW	A		%	%	%	%	%	%	%	%	%	%	%	%	s	s	s
430	1FC6 454-8	2980	26.5	370	621	750	94.2	93.7	92.8	91.8	94.8	380	290	22.8	12.6	15.1	19.3	2	0.02	0.07	0.003
550	456-8	3100	30.4	470	794	750	94.3	94.1	93.5	92.5	95.5	360	270	22.5	11.9	14.7	18.6	1.9	0.021	0.071	0.003
670	1FC6 502-8	3350	39	580	970	750	93.7	93.4	93	91.7	94.7	395	300	23.5	13.6	17.4	21	2.3	0.021	0.077	0.003
730	504-8	3600	43.5	625	1050	750	93.8	93.8	93.6	92.5	95.2	350	265	19.7	11.4	14.5	18.5	1.8	0.023	0.079	0.003
800	506-8	3800	47.9	680	1150	750	93.9	94	93.8	92.9	95.4	335	250	18	10.4	13.2	17.4	1.6	0.024	0.079	0.003
1050	1FC6 562-8	4500	67.3	900	1520	750	94.8	94.1	93.2	92.1	95	490	370	23.6	11.9	16.3	19.7	2.3	0.019	0.079	0.003
1200	564-8	4850	76.5	1020	1740	750	95.2	94.5	93.5	92.6	95.3	520	390	24.3	12.4	17	20.8	2.1	0.022	0.082	0.003
1300	566-8	5150	82.2	1120	1880	750	95.3	94.5	93.5	92.4	95.1	590	445	27.7	14.1	19.6	23.4	2.1	0.025	0.084	0.003
1400	567-8	5650	100	1200	2000	750	95	94.7	93.9	93.1	95.6	400	300	18.3	9.5	13	17.5	1.3	0.027	0.085	0.003
1500	568-8	6000	110	1280	2150	750	95	94.6	93.9	93.1	95.6	400	300	19.4	11	14.4	18.9	1.4	0.029	0.095	0.003
1300	1FC5 632-8	6300	125	1100	1880	750	94.1	94.4	94.2	93.1	95.5	250	230	27.5	21	22	21.5	2.1	0.037	0.194	0.01
1480	634-8	6700	144	1250	2140	750	94.4	94.8	94.6	93.7	95.9	240	220	25.5	19.5	20.3	19.8	1.8	0.04	0.191	0.01
1820	636-8	7500	166	1540	2630	750	94.8	95.1	94.8	94	96.1	250	230	24	18	19.1	18.6	1.8	0.039	0.192	0.01
2050	638-8	8000	180	1720	2960	750	95.1	95.4	95.1	94.3	96.3	250	230	23	16.5	17.5	17	1.6	0.04	0.183	0.01

 

10 poles(600rpm)
Capacity	Type	Net	Moment	Power	Current	Rev./min	Performance data					Technical data for short-circuit calculation
		weight	of inertir	input			1/2    3/4     4/4     5/4    4/4					Xd	Xq	Xd	Xd"	Xq"	X2	r1	Ta	Td'	Td"
kVA		kg	kgm2	kW	A		%	%	%	%	%	%	%	%	%	%	%	%	s	s	s
320	1FC6 454-3	2790	28.9	280	460	600	93.2	92.6	92.2	91.5	93.8	375	285	32.9	13.3	13.2	13.3	2	0.016	0.053	0.002
400	456-3	2860	32.3	345	580	600	93.5	93	92.7	92.1	94.2	360	270	31.2	12.4	12.3	12.4	1.8	0.019	0.065	0.002
550	1FC6 502-3	3300	39.1	475	790	600	93.7	93.6	93	92.1	95.2	210	160	25	13.2	15.9	14.6	2.1	0.022	0.083	0.002
590	504-3	3700	47.3	505	850	600	93.6	93.7	93.4	92.6	95.5	175	130	20.7	10.9	13	11.9	1.6	0.022	0.082	0.002
670	506-6	3900	50.4	570	970	600	93.8	94	93.7	93	95.6	190	140	20.9	11	13.2	12.1	1.5	0.023	0.084	0.002
790	1FC6 562-3	4500	72.8	680	1140	600	94	93.6	93.1	91.9	94.9	230	180	23.7	13.2	16.5	14.8	2.2	0.022	0.066	0.002
890	564-3	4700	79.9	765	1280	600	94.2	93.8	93.3	92	95	240	180	23.3	13.5	16.8	15.1	2.2	0.022	0.07	0.002
1050	566-3	5150	87.1	895	1520	600	94.1	93.9	94	92.6	95.3	210		160	18.5	9.4	12.2	10.8	0.017	0.06	0.002
1100	1FC5 632-3	6600	161	940	1590	600	93.4	94	93.7	93	94.9	190	170	21.5	16	16.7	16.3	2	0.031	0.152	0.01
1260	634-3	7100	172	1070	1820	600	93.6	94.2	94.1	93.4	95.3	180	160	20	15	15.4	15.1	1.7	0.033	0.15	0.01
1500	636-3	7800	192	1270	2170	600	94.1	94.7	94.6	93.9	95.9	190	170	19.5	14	14.7	14.3	1.6	0.034	0.152	0.01
1680	1FC5 710-3	8500	253	1430	2430	600	94.3	94.6	94.3	93.5	95.6
1900	712-3	9300	280	1610	2740	600	94.2	94.8	94.6	93.8	95.9
2100	714-3	10000	300	1770	3030	600	94.5	95.1	94.9	94.3	96.2
2350	716-3	10900	327	1880	3390	600	94.4	95	94.8	94.2	96.1

 

12 - 14 poles(500-428.5rpm)
Item		kW		Voltage		Speed
				V	Hz	rpm
1FC501-12		225	225	400	50	500
1FC502-12		330/300	330/300	400	50	500
1FC504-12		380/350	380/350	400	50	500
1FC506-12		420/400	420/400	400	50	500
1FC564-12		550/530	550/530	400	50	500
1FC564-14		450/420	450/420	400	50	428.5

 products catalogue download

Share on:

 

 

 

 

•  
•